Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Membership
Contact Us
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:



Abareghi A, Entezari A, Darzinejad K, Mohajerani E, Mohammadpur Amini M. Fabrication and Characterization of a Blue Organic Light Emitting Diode with new synthesized materials structured ITO/PEDOT:PSS/PVK:TPD:PBD:dopant/BCP/Ca/Al. ICOP & ICPET _ INPC _ ICOFS 2018; 24 :217-220
URL: http://opsi.ir/article-1-1539-en.html
URL: http://opsi.ir/article-1-1539-en.html
Afshin Abareghi *1
, Amir Entezari1
, Khodabakhsh Darzinejad2
, Ezzedin Mohajerani1
, Mostafa Mohammadpur Amini2










1- Laser and Plasma Research Institute, Shahid Beheshti University, G.C., Tehran 1983963113, Iran
2- Department of chemistry, Shahid Beheshti University, G.C., Tehran 1983963113, Iran
2- Department of chemistry, Shahid Beheshti University, G.C., Tehran 1983963113, Iran
Abstract: (2577 Views)
In this paper, we used two new synthesized materials to fabricate blue organic light-emitting diodes. These emissive materials were used individually in a host-gest system and then spin coated as emissive layer. After obtaining the results, the performance of the two materials in the structure of the emitting diode was compared. The current-voltage characteristics indicate that the fabricated devices with synthesized material 1 have less turn on voltage than the other material. Also, the electroluminescence spectra of the devices reveals that synthesized material 1 has better color purity. The intensity of the diodes made with this material is also higher.
Rights and permissions | |
![]() |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |