Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Legal Members
Membership
Contact Us
year 27, Issue 2 (ICOP & ICPET 2021 2021)
ICOP & ICPET _ INPC _ ICOFS 2021, 27(2): 154-157 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Khalilzadeh J, Ghahremani M S. Simulation of the effect of adsorbent coating thickness on shock wave penetration depth in Ti-6Al-4V laser shock process. ICOP & ICPET _ INPC _ ICOFS 2021; 27 (2) :154-157
URL: http://opsi.ir/article-1-2329-en.html
URL: http://opsi.ir/article-1-2329-en.html
1- Department of Photonics, Imam Hossain University, Tehran, Iran
Abstract: (900 Views)
Ti-6Al-4V is a very attractive metal for various industries due to its low density, high corrosion resistance, good biological compatibility and high weight resistance ratio. Therefore, much research has been done to improve the surface properties and mechanical properties of Ti-6Al-4V. One of the most important factors in the laser shocking process is determining the thickness of the adsorbent coating. Selecting the low thickness of the adsorbent coating will damage the surface of the material and selecting its high thickness will reduce the depth of shock wave penetration into the material. In this study, the effect of adsorbent coating on Ti-6Al-4V laser shocking process was investigated and the optimal thickness of adsorbent coating in this process was calculated to be 0.3 mm. The results of this study can be used in the field of optimization of Ti-6Al-4V laser shock in industry.
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
