Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Legal Members
Membership
Contact Us
Volume 25 - ICOP & ICPET 2019
ICOP & ICPET _ INPC _ ICOFS 2019, 25 - ICOP & ICPET 2019: 1077-1080 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Ajami A, Husinsky W. Micro-nano 3D structuring based on two-photon photopolymerization. ICOP & ICPET _ INPC _ ICOFS 2019; 25 :1077-1080
URL: http://opsi.ir/article-1-1705-en.html
URL: http://opsi.ir/article-1-1705-en.html
1- Faculty of Physics, Semnan University, Semnan, Iran
2- Institute of Applied Physics, Vienna University of Technology, Vienna, Austria
2- Institute of Applied Physics, Vienna University of Technology, Vienna, Austria
Abstract: (2181 Views)
Based on linear absorption photopolymerization it is not possible to create 3D microstructure with resolution below the diffraction limit which depends on the wavelength of the laser beam used for photopolymerization as well as the optics used for focusing the laser beam. Using high intense laser beam with wavelength beyond the linear absorption spectrum it is possible to create structures based on two-photon photopolymerization (2PP) with resolutions below the diffraction limit. In this work we determined the two-photon absorption (2PA) cross section of a two-photon initiator (2PI) using an open-aperture Z-scan. Then we utilized the examined 2PI for creating 3D microstructures based on 2PP. The realized structures illustrate the resolution of a few 100 nm which is well below the diffraction limit of the setup used for the structuring.
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
